Saturday, October 22, 2011

index» » 1996 Volkswagen Golf air-conditioning, wiring diagrams and a procedure for removing

1996 Volkswagen Golf air-conditioning, wiring diagrams and a procedure for removing

His air conditioner-a guide for the replacement of the heater system and electrical circuits for VW 1995-1996 vehicle, which may apply to the Cabrio, golf, golf III GTI, Jetta and Jetta III. Here you will get an explanation for the a/c heater systems and location of the charts. Temperature of the lid on the cable adjustment, ensure the cable is connected with a/C-heater Control Panel and the Panel is installed. Remove cable bag retaining clip (cable bag is blue). Disconnect the cable from the Central flap lever. Adjust knob to defrost flow distribution position. Connect the cable to the Central flap lever. In the direction of the arrow, push the lever until it stops. Test: ensure the bubbles are present in the sight glass. See Figure 1. Connection manifold gauge set for service valves. Press the A/b/C RATE. Set the fan motor of 2nd speed. The system is well if the air temperature in the Centre of vent is less than 50øF (10øC) after one minute and working pressure of the system are in the specification. Removal, disposal and Install a/c system using approved refrigerant recovery/recycling equipment. Remove the front bumper. Remove the dashboard and the support bracket. See Instrument Panel. Remove the evaporator housing. Enlarged view of A/C-heater system components. Instrument panels. Exploded view of the evaporator housing.

Download links:
http://www.veedubz.Co.ZA/Tech/VW%20Haynes%20Mk3/AC-HEATER%20SYSTEM%20-%20MANUAL.PDF